Lihat Juga

• Pembentukan komposit matriks Al-4%Cu-4%Mg berpenguat 5% vf dan 10% vf Al2O3 melalui proses thixoforming = Fabrication of composite matrix Al-4%Cu-4%Mg with 5%vf and 10% vf Al2o3 reinforcement by thixoforming process / Abdullah Fahmi
  Terbitan: (2014)
• Karakteristik komposit Al-5% Cu-4% mg berpenguat 20-25% Sic hasil As-Cast dan hasil proses thixoforming = Characteristic of Al-5% Cu-4% Mg composite reinforced 20-25%Sic as an as-cast product and thixoforming process product
  Terbitan: (2013)
• Studi karakteristik komposit Al-5% Cu-4% Mg berpenguat 5% 10% dan 15% SiC hasil As-Cast dan hasil proses thixoforming = Study of characteristic of Al-5% Cu-4% Mg composite reinforced Sic 5% 10% dan 15% as cast and after thixoforming
  Terbitan: (2013)
• Fabrikasi dan karakterisasi komposit Al-0.12Zr-0.15Ce berpenguat partikel @-Al2O3 80 nm dengan penambahan 5 wt% Mg sebagai unsur peningkat kemampubasahan melalui proses stir casting = Fabrication and characterization of al 0 12zr 0 15ce composite reinforced by al2o3 80 nm with addition of 5 wt mg as wettability agent using stir casting process
  Terbitan: (2014)
• Pengaruh penambahan 0,4 % wt, 0,31 % wt, 2,16 % wt, tembaga serta fraksi volum dan proses canai dingin terhadap kondisi antarmuka kekerasan dan kekuatan aluminium matriks komposit berpenguat kawat tali baja dengan metode squeeze casting = The effect of 0.4%wt magnesium and 0.051%wt, 0.31%wt, 2.16%wt cooper addition with volume fraction and cold rolling process toward to the interface condition, hardness and strength of aluminum matrix composite reinforced high carbon steel wire rope with squeeze casting method
  Terbitan: (2010)