Profil Vertikal Logam Berat Tembaga (Cu), Nikel (Ni), dan Mangan (Mn) di Core Sedimen Perairan Pantai Marunda, Teluk Jakarta
| Main Authors: | Darmansyah, Kresna Rangga, Wulandari, Sri Yulina, Marwoto, Jarot, Supriyantini, Endang |
|---|---|
| Format: | Article info application/pdf Journal |
| Bahasa: | eng |
| Terbitan: |
Universitas Diponegoro
, 2020
|
| Subjects: | |
| Online Access: |
https://ejournal2.undip.ac.id/index.php/jkt/article/view/5667 https://ejournal2.undip.ac.id/index.php/jkt/article/view/5667/3717 |
Daftar Isi:
- Heavy metals contained in the waste enter to the Marunda coastal waters in Jakarta Bay through the Tiram river, come from the Jabodetabek region which is an industrial and residential area. They will be deposited and accumulated in the bed sediments and potentially to cause contamination in the waters as well. The study was conducted to investigate vertical profiles of heavy metals Cu, Ni, and Mn based on sediment depth and the correlation between the concentration of heavy metals and the grain size of sediments. Coring method was used for sampling the sediments at 1-3 cm, 4-6 cm and 7-9 cm of depths. Samples were analyzed using AAS method to determine Cu, Ni, and Mn concentrations. Sieving and pipetting methods were used to determine the grain size of the sediments. The results showed that the average concentration of heavy metals Cu, Ni, and Mn in the top layer was 7.74 ppm; 8.17 ppm; 1345.03 ppm. The middle layer was 6.91 ppm; 7.48 ppm; 1279.35 ppm. The bottom layer was 7.36 ppm; 7.79 ppm; 1413.66 ppm. The concentration of Cu heavy metal had a positive correlation with the sand fraction, while the heavy metals Ni and Mn had a positive correlation with the mud fraction. Logam berat yang terkandung dalam limbah masuk ke perairan pantai Marunda di Teluk Jakarta melalui sungai Tiram, berasal dari daerah Jabodetabek yang merupakan kawasan industri dan pemukiman. Logam berat tersebut akan mengendap dan terakumulasi di sedimen dasar perairan dan berpotensi menimbulkan pencemaran perairan. Penelitian ini bertujuan untuk mengetahui profil logam berat Tembaga, Nikel, dan Mangan secara vertikal berdasarkan kedalaman sedimen dan korelasi antara konsentrasi logam berat dengan ukuran butir sedimen. Pengambilan sampel sedimen dilakukan menggunakan metode coring untuk kedalaman 1-3 cm, 4-6 cm, dan 7-9 cm. Selanjutnya sampel sedimen dianalisis menggunakan metode AAS untuk mengetahui konsentrasi logam berat Cu, Ni, dan Mn. Metode sieving dan pipetting digunakan untuk mengetahui ukuran butir sedimen. Nilai konsentrasi rata-rata logam berat Cu, Ni, dan Mn pada lapisan atas untuk setiap stasiun berurutan sebesar 7,74 ppm; 8,17 ppm; 1345,03 ppm. Lapisan tengah sebesar 6,91 ppm; 7,48 ppm; 1279,35 ppm. Lapisan bawah sebesar 7,36 ppm; 7,79 ppm; 1413,66 ppm. Konsentrasi logam berat Cu mempunyai korelasi positif terhadap fraksi pasir, sedangkan logam berat Ni dan Mn mempunyai korelasi positif terhadap fraksi lumpur.